Clik here to view.
Standing in REAL ; Failing in model
Hi All,i have modelled a wall mounted bracket supporting a 300 x 90 Dc PFC column. members 53 is failing in Compression for load of 46.10 but member 52 is passing in 49.58 Comprexssion. Both member are...
View ArticleClik here to view.
RAM Concept - Beam Trimming
Hi Seth, Am I correct in saying there are currently no option to trim the beam as shown below? Obviously the red being the shear core. Closest I can get is the 'max shear core' option, however 110mm...
View ArticleClik here to view.
Frame Type for Braced Frames Connections Not Available
Applies To Product(s):RAM Elements; Ram Connection Version(s):12.01.00.29 Area: General Original Author:Karl Gullerud, Bentley Technical Support Group ProblemFrame Types for Braced Frames used...
View ArticleClik here to view.
Failed to Create Slab Edge load Polygons
Product(s):RAM Structural System Version(s):13.00.00.00 or later Environment: N/A Area: Analysis Original Author:Bentley Technical Support GroupProblemDuring the framing table process a model may...
View ArticleAdding TJI Joist Table to Ram SS
I am planning to add a Trus Joist TJI constant shear joist table to Ram SS. I have done similar tables for other joists. To get the deflection close, I modify the moment of inertia by the modular...
View ArticleClik here to view.
Ram Elements - Tilt Up Wall [FAQ]
Product(s):RAM Elements Version(s):Any Environment: N/A Area: Design Original Author:Bentley Technical Support GroupCan the module design with one layer of reinforcement?Yes, the module allows one or...
View ArticleRAM Elements Support Solutions
The TechNotes and FAQs in this section cover various topics that pertain to RAM Elements. Use the navigation tree on the left or the popular links below to browse.Installation and Licensing...
View Article